Company Name: Shandong Juli Electric Co., Ltd.
Contact: Gao Manager
Address: No. 16, Yuhuangshan Road, Changqing District, Jinan City
The winding machine looks very complicated when it looks, but it is not very difficult to actually operate it. It is mainly caused by the unfamiliar structure of the winding machine. The enterprise personnel do not have professional technician training. This has caused the average person to have no trouble with his winding machine without a technician.
It will be more difficult and more elaborate than other electronic processing equipment. Fuying Electronics has used the Rieter winding machine for many years and has familiar experience with the use of winding equipment. Here, we will introduce it to you, I believe. As long as you follow the method, you can do it easily.
The winding position, the enameled wire size, and the winding width are the three most important winding parameters for the winding machine.
First, how to set the winding position? Where is the skeleton coil's winding position? In fact, there is no fixed position at the starting point of winding on the skeleton. The position and the beginning of the coil are determined by the coil type. Generally, the specific winding position can be measured by using the measurement function of the equipment control system. Numerical value; the technician can also use the method of manually measuring the value, and use the ruler as the reference point to actually measure the position. When setting this point, pay attention to the specific winding direction of the coil.
Second, the specific setting of the enameled wire specification, the enameled wire for daily use has different wire diameters, different enamelled wire specifications will produce different cable effect, in the use of different materials of the enameled wire should pay attention to the specific value of the correction wire diameter, This way the copper wire will not be deformed.
Third, the setting of the winding width value
We can understand the value of the winding width from the starting point of the winding to the end point of the winding. The length of the winding of the coil is usually known by the value. Of course, it is necessary to consider the amount of small deformation caused by the force of the pair used during the setting. This will definitely affect the winding width and determine the production. Therefore, it is necessary to use a variety of measurements to take the minimum value. As the winding width.
Fourth, for different types of wire wound around the coil, the product's specific number of turns, the number of folded layers and the average winding speed requirements must also be well understood, the winding speed of the thick wire model can not be too fast, if the speed is too fast, it will cause The quality problems of the wire jumper and lost step, etc., must be strengthened to the torque of the winder when used at low and medium speeds.
When the wound coil is square, the winding speed of the wound coil can not be too fast, otherwise the unevenness will occur, affecting the number of folded layers and the number of turns. Moreover, it is necessary to reasonably arrange the distance between the coil and the cable arranging device. When it is low, it is easy to fall into other layers. When it is high, it is easy to jump, and at the same time, it is not possible to drink the cable tray too far, or it will affect the accuracy.