Company Name: Shandong Juli Electric Co., Ltd.
Contact: Gao Manager
Address: No. 16, Yuhuangshan Road, Changqing District, Jinan City
The winding machine needs to cooperate with the mold and the skeleton to wind out the coil. Different coils and wire diameters can be used to produce different coils. Therefore, the mold is one of the important accessories of the winding machine. There are many types of used. The materials are also different, generally determined according to the characteristics of the coil. Baocheng Automation mainly introduces the application of several common materials in the winding mold.
1. Moulds made of electrical wood and wood are usually used in the winding of the stator coil of the motor. The material is lighter and has a certain hardness. When winding the stator coil of the motor, it is necessary to load and unload the mold frequently, so the electric board The wood board meets this characteristic and is the most common material used for the mold of the motor stator coil.
Second, the plastic and glass steel mold plastic is a common material in our life, it is characterized by strong plasticity, in the mold we commonly use plastic materials with ballast coils and common standard molds, this kind The mold of the material needs to be customized for mold opening, and is generally applied to the skeleton type of the direct winding type. The coil type of the reactor is commonly used for the FRP material, and its hardness is high, and it is applied to the coil bobbin with a relatively large number of turns.
Third, the metal material of the mold metal material is also one of the commonly used materials for the winding mold, our common tire removal mold is made of steel, wear and non-deformation is its advantage, the common skeleton block is also generally made of metal.