器身装配架

categories of news

Product Categories

contact us

Company Name: Shandong Juli Electric Co., Ltd.

Contact: Gao Manager

Phone: 0531-85713571

Mobile: 13521613463

E-mail: shandongjuli@vip.sina.com

Fax: 0531-85713571

Website: www.sdjuli.com

Address: No. 16, Yuhuangshan Road, Changqing District, Jinan City


Transformer winding machine uses two steps

Your current location: home >> News >> Industry news

Transformer winding machine uses two steps

Release date:2018-06-15 AuthorJuli Electric Click:


First, correctly set the parameters of the transformer winding machine


      Whether the winding machine can work normally and plays a key role. The transformer winding machine is different from other winding machines, which belongs to the slow running equipment. The production process of the transformer determines the frequent starting and constant rotation of the equipment. Moment requirements, the general transformer winding machine needs to set the parameters: the number of turns is the number of turns the device needs to run according to the production process, it is divided into the total number of turns and the number of turns corresponding to each step, the setting is Note that the total number of turns is equal to the sum of the number of steps in each step; the idle function setting is also a commonly used parameter. It mainly controls the slow start of the device when starting and stopping, and functions as a gentle start and parking buffer. Correct setting It can allow the operator to have a process of adapting to the tension when starting the winding machine. When the equipment is parked, the buffer can stop the parking more accurately; the running speed is used to control the running speed of the equipment, and the speed setting needs to be combined with the production process. And the actual working conditions of the winding determine that too fast and too slow are not conducive to the formation of the coil, fast operation will be detrimental to the operator's control, increase the vibration and noise of the equipment, Low-speed operation will greatly affect the capacity and efficiency of the equipment, and will also affect the torque output of the equipment spindle; the step-by-step function is used to control the order of equipment operation, which is generally determined according to the production process, a coil Molding is not only the winding of the enameled wire, but also many other steps such as wrapping paper, insulating cloth, etc., so the correct setting of the step-by-step function will effectively play the efficiency of the equipment.

Vertical winding machine

Second, the correct loading and unloading of molds and plastic surgery


         The winding machine can only work normally if the winding mold is used correctly. The correct loading and unloading mold plays a key role in the forming of the coil. The loading and unloading process of the mold is generally to first loosen the fastening device and then remove the device. The thimble tailstock, and finally use the shifting device to remove the coil. When installing, please pay attention to the mold to be installed on the fixing device of the winding machine, adjust the ejector tailstock to bear against the winding mandrel, and finally lock it; During the process of shaping the coil, the ejector pin must not be loosened and the device should be in a stopped state. Only when properly handled can the efficiency of the device be better utilized.


This article URL:http://en.sdjuli.com/news/423.html

Key words:Windingmachineclassification,Windingmachinemanufacturers,Windingmachineprice

Recently Viewed:

  • service
  • contact number
    18270919270
  • message
  • Mobile website
  • Online consultation
    Welcome to leave a message
    Please enter your message here and we will contact you as soon as possible.
    Name
    Contact
    tel
    tel
    e-mail
    e-mail
    add
    add